.png)
DC-310N-P
Plaster Packing Machine (Zipper Bag) Taiwan Patent No. M427265, M584296 / China Patent No. ZL201220029776.2
Note: The above information (parameter) is only for use of your reference. The standard condition is based on the actual design.
| Packing Size: | 165 x 220 mm (Depending on customer’s needs) |
| Product Size: | 120 x 150 mm (Depending on customer’s needs) |
| Speed: | 50 pack / min (Depending on the material used) |
| Motor: | 1.5 HP x 1, 1 HP x 2, 1/2 HP x 2 |
| Heater.: | 2.6 kw |
| Human-Machine Interface: | 8.4” |
| Dimension: | L420 x W140 x H220 cm |
| N. W.: | 1650 kgs |
Note: The above information (parameter) is only for use of your reference. The standard condition is based on the actual design.
-
左邊邊線與圓角右邊邊線與圓角Feature
-
- The structure of the machine is concise, streamlined production with four edges
- Tension of material is controlled automatically by LOADCELL.
- A number of servo motors on the machine are precisely synchronized for revolving.
- HMI (Human Machine Interface) and touch panel adopted on this machine make positioning of product much easier.
- Machine will automatically stop as soon as running out of material is detected by auto sensor.
- Defect product detection device: (Such as when empty pouch or quantity insufficient is detected and then, it will be automatically rejected.)
- Positioned cutting can be done after the printing mark detected by sensor of photoelectric.
- Machine designed in upright position to facilitate the operating for production. And it is easy to change for making different specification of products and also very easy to do regular maintenance.
- Suitable for use on one single roll of packing paper for positioning the correct printing both on front and back side of the packing paper to fit in with each other after cutting.