.png)
CM-133
Wound Exudation Dressing Making Machine Taiwan Patent No. M338645
China Patent No. ZL200820104721.7
Note: The above information (parameter) is only for use of your reference. The standard condition is based on the actual design.
China Patent No. ZL200820104721.7
| Product size: |
50 x 50 ~ 100 x 200 mm (one product size only for one machine, extra size optional.) |
| Max.speed: |
35 pcs / min (according to the material used) |
| Motor: | 1HP x 3, 1/2HP x 3 |
| Heater: | 3.2 kw |
|
Human machine interface: |
10.4" |
| Dimensions: | L5000 x W1100 x H2400 mm |
Note: The above information (parameter) is only for use of your reference. The standard condition is based on the actual design.
-
左邊邊線與圓角右邊邊線與圓角Feature
-
- Tension of material is controlled by LOADCELL.
- It can be adjusted by hand-wheel when positioning of product needs to be corrected.
- Plaster shaping is done by cutting roller and products are possible to be made in various shapes.
- Sealing and cutting, etc. are done by push- punch- type cutter.
- A number of servo motors on the machine are precisely synchronized for revolving.
- HMI (Human Machine Interface) makes positioning of product much easier.
- Perforating, shaping and sealing, etc. are done by cutting roller and products are possible to be made in various shapes.
- Waste after shaping are smoothly collected and sucked into the drum by pump for better production process.
- Positioned cutting can be done by detecting the printing mark on packing paper sensed by photoelectric.
- Machine will automatically stop as soon as running out of material is detected by auto sensor.
- Machine designed in upright position to facilitate operating the machine for production. And it is easy to change for making different specification of products including doing regular maintenance.